Why You Need to Turn On Your TCL TV Without Remote
Remote controls, also known as clickers, have become an essential accessory for TVs. They enable us to change channels, adjust the volume, and switch between different modes easily. However, at times, we misplace the remote control, or the batteries run low, leaving us desperate to turn on the TV. What do you do when you do not have a remote to power on your TCL TV? This article will guide you on how to turn on your TCL TV without remote control.
Before diving into the steps, it is crucial to note that not all TCL TV models have a power button. If your TCL TV model does not have a power button on the TV itself, you cannot turn it on without a remote. Check your user manual to confirm whether your TCL TV has a power button or not.
Using a Universal Remote
If you have a universal remote that can control your TCL TV, then follow these steps to turn on your TV. First, ensure that your TV is plugged in, and the power outlet is working.
Next, press the “TV” button on your universal remote, followed by the “Power” button. Afterward, your TV should turn on, and you will be able to use the universal remote to control it.
If you don’t have a universal remote, you can purchase one from your local electronics store or online. Ensure that the remote is compatible with TCL TV models.
Using the Physical Power Button on the TCL TV
If your TCL TV model has a power button on the TV itself, then you can easily turn it on by following these steps. Locate the physical power button, normally located on the bottom or side of your TCL TV.
Once you find the power button, press and hold it for a few seconds. Afterward, your TV should turn on, and you will be able to use it without a remote.
In case your TV does not turn on, ensure that it is plugged in and the power outlet is working correctly. Also, check that the batteries in the remote control are not dead or drained.
Using your TCL Roku TV Mobile App
If your TCL TV is a Roku TV, you can use your mobile phone as a remote control. You will need to download the TCL Roku TV mobile app on your Android or iOS device.
Once you have downloaded and installed the TCL Roku TV mobile app, follow these steps to turn on your TV. First, ensure that your TV is plugged in, and the power outlet is working.
Launch the TCL Roku TV mobile app on your mobile device and allow the app to connect to your TV. Once connected, tap the power icon on your mobile app, and your TV should turn on.
If your mobile device is not connected to the same network as your TCL Roku TV, you will not be able to turn it on through the app.
Turning on your TCL TV without a remote is possible, depending on your TV model. If your TV has a power button, you can use it to turn on the TV. Additionally, you can use a universal remote or the TCL Roku TV mobile app to power on your TV. Remember always to ensure that your TV is plugged in and the power outlet is working correctly. Get back to enjoying your favorite shows and movies with ease.
Use the Buttons on the TV
If you’ve lost or misplaced your TCL TV remote, don’t worry! You can still turn on your TCL TV without the remote by using the buttons on the TV itself. Look for the power button on your TCL TV. It’s usually located on the bottom panel of the TV or on the side panel. The power button is typically represented by a circle with a line through the top of it.
To turn on your TCL TV using the power button, simply press the power button once. The TV should turn on instantly. However, if your TV doesn’t power on after pressing the power button, unplug your TV from the power outlet for 30 seconds before plugging it back in. Then, try pressing the power button again. This should power on your TCL TV.
If your TCL TV doesn’t have a power button on the bottom or side panel, it’s most likely located on the back panel of your TV. In this case, you may need to use a flashlight to locate the power button. Once you’ve found the power button, press it once to turn on your TCL TV.
It’s important to note that while turning on your TCL TV with the power button is easy, you won’t be able to use other TV functions without the remote. If you need to change the channel, adjust the volume, or access settings, you’ll need to use a universal remote or purchase a new TCL TV remote.
In conclusion, turning on your TCL TV without the remote is possible by using the power button on the TV itself. Locate the power button on your TCL TV, press it once, and your TV should turn on instantly. However, you may need a remote to access other functions on your TV.
Use a Universal Remote
If you have misplaced or lost your TCL TV remote, the best solution is to use a universal remote. Most universal remotes have codes for major brands, including TCL, and all you need is to program the remote with the TCL TV code. A universal remote will allow you to turn on your TCL TV without the original remote. Here’s how:
Step 1: Check the Manual – Every universal remote comes with a manual that includes a list of codes. Look for the TCL code in the manual and take note of it.
Step 2: Turn on the TV – Press the power button on the TCL TV to turn it on. It’s easier to test the code when the TV is on, and the process is much faster.
Step 3: Locate the Setup Button – Find the setup button on your universal remote. It may be located on the side, bottom, or back, depending on the brand. Press the setup button until the LED light changes color.
Step 4: Enter the TCL Code – Once the LED light changes color, enter the TCL code using the number pad on your remote. The LED light should blink twice indicating that the code has been entered successfully.
Step 5: Test the Universal Remote – Point the universal remote at the TCL TV and press the power button. The TV should turn off and on again if the code was properly entered. If not, try the process again with a different code from the manual, as sometimes it can take a few attempts to find the correct code.
Using a universal remote is an easy and convenient way to turn on your TCL TV without the original remote. Make sure to read the manual carefully and follow the steps correctly to avoid any issues.
Use the TCL App
As modern technology continues to advance, we’re beginning to rely more and more on our smartphones to control different pieces of electronic equipment in our homes. TCL has capitalized on this with its own app. If you’ve lost or misplaced the remote for your TCL TV, one of the easiest options is to use the TCL app in its place.
After downloading and installing the app on your smartphone, make sure you’re connected to the same Wi-Fi network as your TV. Then, open the app and follow the prompts to connect to your TV. Once this process is complete, you’ll be able to use the app to control your TV just like you would with a physical remote.
In addition to its basic remote functionality, the TCL app also has a range of other features that you can use to customize your viewing experience. For example, you can use the app to stream content from your phone to your TV, change the picture settings, and adjust the volume.
Overall, the TCL app is an easy and convenient way to turn on your TCL TV without a remote. It’s worth noting, however, that this method requires your TV to be already connected to a power source. So, if you’ve lost both your remote and the power cord, you’ll need to opt for a different solution.
Use Voice Commands
One of the most convenient ways to turn on your TCL TV without a remote control is by using voice commands. This is especially helpful if you have a TCL TV with voice control features. With voice control, you can simply say the commands out loud and your TV will respond accordingly.
To use voice commands, make sure that your TCL TV is connected to the internet and that the voice control feature is turned on. You can do this by going to the settings menu and selecting “Voice Control” from the options. Once you’ve enabled voice control, you can start using it to turn on your TV.
To turn on your TCL TV using voice commands, simply say “Hey Google” or “Alexa” followed by the command “Turn on my TCL TV”. Your TV should turn on automatically. You can also use voice commands to navigate through the menu and launch different apps. For example, if you want to watch Netflix, you can say “Hey Google, launch Netflix on my TCL TV” and the app should launch.
One of the advantages of using voice commands is that you don’t need to be in the same room as your TCL TV to turn it on. As long as you have a smart speaker or a smartphone with voice control capabilities, you can turn on your TV from anywhere in the house. This can be especially helpful if you’re in another room and don’t want to get up to find the remote control.
Another advantage of using voice commands is that it can be faster and more convenient than using the remote control. With voice commands, you don’t need to search for the remote, point it at the TV, and press the right buttons. Instead, you can simply say the commands out loud and your TV will respond instantly. This can save you a lot of time and make watching TV more enjoyable.
However, it’s important to note that voice commands may not work perfectly all the time. Sometimes, the TV may not recognize your voice or may misunderstand your commands. In such cases, you may need to repeat the commands or use a different method to turn on your TV. Additionally, voice commands may not be available on all TCL TV models, so make sure to check the user manual before you try to use this feature.
In conclusion, using voice commands is a convenient and easy way to turn on your TCL TV without a remote control. With the help of a smart speaker or a smartphone with voice control capabilities, you can turn on your TV from anywhere in the house and navigate through the menu with ease. Although voice commands may not work perfectly all the time, they can be faster and more convenient than using the remote control. So if you have a TCL TV with voice control features, give it a try and see how it can make your TV watching experience more enjoyable.